Standard CD Studs
Flanged Capacitor Discharge
Standard Insulating Pins
3mm | 5mm | 10mm |
---|---|---|
4mm | 6mm | 6mm |
5mm | 6mm | 8mm |
6mm | 8mm | 10mm |
8mm | 10mm | 8mm |
c-0.23% max Mn-0.60% max P-0.04% max S-0.05% max | AISI grade-304 Other grades available on request | Alloy-1100 & 5086 std Other alloys available on request |
---|---|---|
Tensile 75,000psi (max) Yield 64,000psi (max) Elongation 21% (in 2 inches) | Values for various grades available upon request | Values for various alloys available upon request |
.105 | 5mm | As required |
---|
Material | Mild Steel, Stainless steel 304, Aluminium |
---|---|
Plating | Zinc plating, Standard on mild steel pins |
Annealing | Available on request |
Speed Clips | Self locking speed clips are available in a variety of sizes and material up to 2.1/2" square |
Drawn Arc Studs
Threaded Studs
c-0.23% max Mn-0.60% max P-0.04% max S-0.05% max | AISI grade-304 Other grades available on request | |
---|---|---|
Tensile 75,000psi (max) Yield 64,000psi (max) Elongation 21% (in 2 inches) | Values for various grades available upon request |
Headed Concrete Anchors
Shear Connector
12.7 +0.00 -0.25 | + -1.6 | 25.4 + -0.4 | 7.1 |
---|---|---|---|
15.9 +0.00 -0.25 | + -1.6 | 37.1+ -0.4 | 7.1 |
c-0.23% max Mn-0.60% max P-0.04% max S-0.05% max | |
---|---|
Tensile 75,000psi (max) Yield 64,000psi (max) Elongation 20% (in 2 inches) |
Ferrule
NOTE: Ferrules are component parts of studs.
NOT SOLD SEPARATELY
Headed Concrete anchors are available for welding to flat surfaces, inside angles and outside angles. Each of these applications requires the proper style of stud and ferrule, so please specify your application when ordering studs. Ferrule exterior dimensions available on request.
19.0 +0.00 -0.38 | + -1.6 | 31.7 +-0.4 | 9.5 |
---|---|---|---|
22.2 +0.00 -0.38 | + -1.6 | 34.9+-0.4 | 9.5 |
AISI, C1015, C1018 or C1020 | |
---|---|
Tensile 60,000psi (min) Yield 50,000psi (min) Elongation 20% (min) Reduction of are 50% (min) |
REFRACTORY ANCHORS
If you want to secure blanket, castable or gunited refractory material and you want to keep costs down, then you need refractory anchors. They offer lower in-place costs than any other similar products on the market today. Designed to meet the requirements of your job, whether it is large or small, they are available for either stud welding or hand welding.